Presentation - 18/02/2020

-
The first class it was intruduced the subject program, the classwork and individual work and also the evalution method.

 As we need to have a personnal page, with some information, it was created one, or uptaded, using 2 programs: Notepad++ and FileZilla.

 It was created also a Blog, that will contain all of our progress trough the classes.

Comentários

Enviar um comentário

Mensagens populares deste blogue

Phase 1 Delivery

-
Imagem
AUTOCAD The objective of this work was to create a space, to expose paintings and would contain some sculputures. I choose one of the Cut Outs (of 100) by Henri Matisse. LINKS: General File: https://drive.google.com/drive/folders/1MnsGp49ZoFa_VvVIkQiS-wrGsLOAEs_Y?usp=sharing AutoCAD File: https://drive.google.com/open?id=1j9pv3HCRqzfdCyocf1UCXcwJId6sFAYM GIF File: https://drive.google.com/open?id=11Ba6hdaw50FSI_mD-M5ZGH5TF3beZgz7 Main Painting: https://drive.google.com/open?id=17cxIU7mZhxRI4GcJPIUyQFHBTVE5DXnx Paintings Used: https://drive.google.com/open?id=1FxQ_8VhRb51vgY3mLtGOvXiP3k-EUgp_ Panel A2: https://drive.google.com/open?id=1Oi4NlSV-W3jZVmLlLKnqc0qdaqHcURr8 Process: https://drive.google.com/open?id=10ijKREtKyOXG9AohyTlznfkc1jbCX5OR PANEL GIF PROCESS
Ler mais

Phase 2 Delivery

-
Imagem
3DS MAX General File: https://drive.google.com/drive/folders/1j5QANrLePbNcjcFl4vopv6lqZaOtlq0W?usp=sharing 3DS MAX File: https://drive.google.com/drive/folders/1jqdbtsXB7Y1VVaDy6lbSepeUHphT5mKV?usp=sharing Panel: https://drive.google.com/drive/folders/1AmZm0cR-BT6WHxusnXnatD8Gnv4eS_Ws?usp=sharing Renders: https://drive.google.com/drive/folders/1oeT1J8q_ght81dUDBZr_3jBYmLfUJ--f?usp=sharing Materiais: https://drive.google.com/drive/folders/1HLyGI4vt1nl_0mpZrVt3l1CsvF2LUAU3?usp=sharing Youtube Link: https://youtu.be/kCSxW1R_Cz4 PANEL ANIMATION RENDERS
Ler mais

Loft - 21/04/2020

-
Imagem
AUTOCAD In this class we learn the different types of EXTRUDE, the LOFT, and EDGESURF. We started by creating a random shape, and then we did different types of Extrude, the first one was "normal", that is perpendicular to the base. The second one, is the DIRECTION method of the Extrude, that is defined by 2 points. The third one, is the PATH , which follows a shape, circular, quadrangular, etc . And the forth one, is the TAPER ANGLE , the angle is given by us. We learn too, that we could Extrude line, so we draw a semi-circle, and did the perpendicular EXTRUDE . We also draw 2 circles, one smaller than the other, and use SUBTRACT , to remove the small one. We did another circle, insert it in the other two, and SUBTRACT the last one made. Since we can't Extrude, lines that are overlapping, we need to use REGION . When we SUBTRACT one of the forms made, even if it makes separeted piec...
Ler mais